Dental Temporary Crown Bridge Material 50ml Resin Self Curing Temp Composite Mixing Tips Impression Mixing Gun 1:1 Dental Materi

Dental Temporary Crown Bridge Material 50ml Resin Self Curing Temp Composite Mixing Tips Impression Mixing Gun 1:1 Dental Material

Advantages：

1.Mixing ratio 1:1 ensures reliability and stability.

2.High compressive strength and flexural strength

3.Excellent bio compatibility

4.Highly aesthetic and more shade available to choose

5.Low shrinkage makes easy preparing and removal.

Instructions for use:

1.Take impression before preparing teeth. Level undercuts and cut drainage channels.In case if there are gaps in the molar area, make a bar connection in the temporary restoration.

2.If there’s undercuts with prepared teeth, use temporary material to level it. Be aware that do not use any eugenol materials.

3.Apply temporary crown material into the impression with 1:1 or 1:2 ratio

dispensing gun and mixing tip (Due to technical reasons there might be a slightly quantity difference when extruding materials from dual barrels at first time use. Therefore squeeze the material out of the barrels until it delivered evenly).Put the impression with filled temporary crown material into patient’s mouth. The operating time should be within 30 seconds.

4.Extract the impression from mouth when material reaching its elastic phase. The elastic phase normally is 0.5-1 minutes after the impression being put into mouth.The status of elastic phase can be observed through the exceeding material inside the mouth.

5.Extract temporary restoration from impression after temporary material

completely cured(curing time is less than 10 minutes). Remove inhibition layer with alcohol if necessary. Make final finishing and polishing.

6.Lute temporary restoration with temporary cement. If later permanent restoration will be using composite material, then non-Eugenio temporary cement should be used for luting temporary restoration.

Shade

A1, A2, A3, A3.5, B1

Storage

Storage temperature 4-25℃/39.2-77°F. Close syringes immediately after usage. Exposure to light causes premature polymerization.

Precautions

This product contains substances that may cause an allergic reaction by skin contacting certain individuals. Avoid use of this production patients with known lacerate allergies. If prolonged contact with oral soft tissue occurs, flush with large amounts of water.If allergic reaction occurs, seek medical attention as needed,remove the product if necessary and discontinue future use of the product.

Disposal

Disposal must be made according to local regulations

Package

1X 50ml cartrige with 10pcs mixing tips